How to Use Quick Fix Synthetic Urine

Using Quick Fix fake urine is easy and only takes a few minutes of prep time. Anyone should be able to follow these simple instructions to achieve success when using our synthetic urine.

If you have any issues or need some extra guidance, please give our customer services a call at any time. We will walk you through using the product and answer any questions you may have.

Check your Batch Code in the Batch Validator.

Checking your batch number will ensure that you’re using an updated formula and a current batch of Spectrum Labs Quick Fix. Failure to check the batch before use could result in using an outdated or expired product. Because of our strict quality control process, we know precisely when a batch has expired or fallen out of specifications. A typical batch shelf life is over 3 years from creation. You must check your batch number before using Quick Fix.

back code location on instructions

batch code on bottle

Activate the Hand Warmer

Activating the hand warmer is as easy as unwrapping the handwarmer from it’s packaging and giving it a quick shake. Please note that it could take up to 45 minutes for the hand warmer to start working. You should make sure the hand warmer is exposed to air to start the chemical reaction.

Set the Hand Warmer to the side at this time and let it continue to warm.

underwapping a heat pack

Shake the Quick Fix Bottle and Remove Induction Seal.

Much like normal urine, the ingredients in your synthetic pee may have settled during shipment. We recommend shaking the bottle for a few seconds. Shaking will ensure that it is thoroughly blended and ready to be heated.

If your Quick Fix fake pee has an induction seal, remove it. An induction seal is typically a tiny foil seal used to prevent leaks during transport. With new advancements in cap technology, we have started to phase induction seals out of our product line. But if your Quick Fix has a seal, go ahead and remove it before the next step.

quick fix foil seal

Microwave For 7-10 Seconds.

Only microwave for about 7-10 seconds. It does not take much to get the Quick Fix to body temperature. You should see a green dot fall between 94-100 degrees. 

If the bottle feels warmer than room temperature in your hand and the temp strip is black, more than likely, the synthetic urine is too hot. Remember, anything over 100 degrees will not read on the temp strip. 

If you find that you microwaved Quick Fix for too long, simply let it cool. After cooling, you should see the temp strip start reading between 90-100 degrees.

Make sure not to microwave the heating pad.

microwaving synthetic urine
green and blue dot on quick fix

Attach the Hand Warmer

You can either use tape or the included rubber band to attach the included hand warmer to the bottle of Quick Fix fake pee. You must attach the hand warmer to the BACK of the bottle.

Do not attach the hand warmer to the same side as the temp strip. Securing the hand warmer to the wrong side may result in the inability to see the temp strip and a false temp reading.

quickfix urine with hand warmer

Quick Fix Usage Tips & Tricks

Heat Quick Fix Without A Microwave

The hand warmer will keep Quick Fix between 90-100 degrees for 5 hours. Although typically used for supplemental heat, the hand warmer can heat Quick Fix when you don’t have access to a microwave. This hand warmer method takes longer than the microwave method, but it’s just as effective.

Quick Fix Can Be Reheated

If you end up not using your synthetic urine sample, simply put it back in its box for future use. No need to buy Quick Fix a second time. You can reheat our synthetic urine as many times as you need. We have even heard of one person reheating Quick Fix every day for an entire year! 

Make sure you stock up on extra hand warmers if you’re going to reheat Quick Fix more than once.

For more usage tips, please visit the frequently asked questions section of our site.