Using Quick Fix fake urine is easy and only takes a few minutes of prep time. Anyone should be able to follow these simple instructions to achieve success when using our synthetic urine.
If you have any issues or need extra guidance, please call our customer services anytime. We will walk you through using the product and answer any questions.
Checking your batch number will ensure you use an updated formula and a current Spectrum Labs Quick Fix batch. Check the batch before use to avoid using an outdated or expired product. Because of our strict quality control process, we know precisely when a batch has expired or fallen out of specification. A typical batch shelf life is over three years from creation. You must check your batch number before using Quick Fix.
Activating the hand warmer is as easy as unwrapping it from its packaging and giving it a quick shake. Please note that the hand warmer could take up to 45 minutes to start working. To start the chemical reaction, you should ensure the hand warmer is exposed to air.
Set the Hand Warmer to the side now and let it warm.
Much like normal urine, the ingredients in your synthetic pee may have settled during shipment. We recommend shaking the bottle for a few seconds. Shaking will ensure that it is thoroughly blended and ready to be heated.
If your Quick Fix fake pee has an induction seal, remove it. An induction seal is typically a tiny foil seal to prevent transport leaks. With new advancements in cap technology, we have started to phase induction seals out of our product line. But if your Quick Fix has a seal, remove it before the next step.
Microwave for about 7 to 10 seconds. It takes little to get the Quick Fix to body temperature. You should see a green dot fall between 94 to 100 degrees.
If the bottle feels warmer than room temperature in your hand and the temp strip is black, more than likely, the synthetic urine is too hot. Remember, anything over 100 degrees will not read on the temp strip.
If you microwaved Quick Fix for too long, let it cool. After cooling, the temp strip should start reading between 90 to 100 degrees.
Make sure not to microwave the heating pad.
You can attach the hand warmer to the Quick Fix fake pee bottle with tape or the included rubber band. You must attach the hand warmer to the BACK of the bottle.
Do not attach the hand warmer to the same side as the temp strip. Securing the hand warmer to the wrong side may result in the inability to see the temp strip and a false temp reading.
The hand warmer will keep Quick Fix between 90 to 100 degrees for 5 hours. Although typically used for supplemental heat, the hand warmer can heat Quick Fix when you don’t have access to a microwave. This hand warmer method takes longer than the microwave method but is just as effective.
If you end up not using your synthetic urine sample, put it back in its box for future use. No need to buy Quick Fix a second time. You can reheat our synthetic urine as many times as you need. We have even heard of one person reheating Quick Fix daily for a year!
Make sure you stock up on extra hand warmers if you reheat Quick Fix more than once.
Please visit our site’s frequently asked questions page for more tips.
Quick Fix® synthetic urine is the brand customers trust and have been asking for by name for the past two decades. We hold two United States patents on the product formulation and are constantly working to improve our product. We manufacture Quick Fix synthetic urine right here in the USA. Spectrum Labs is proud to support the American economy by providing jobs and protecting employee privacy. You can be confident you’ve made the right choice when you purchase Quick Fix® and Quick Fix® Plus Synthetic Urine directly from Spectrum Labs.